DC Fire & Security logoDC Fire & Security
Stevenage · Hertfordshire

Wireless Fire Alarms in Stevenage

A wireless fire alarm in Stevenage uses radio-linked detectors and call points instead of cabling, so it suits occupied buildings, listed buildings and sites where new cables would be disruptive. It is still designed, commissioned and serviced to BS 5839-1 and EN 54-25, with the same category and cause and effect as a wired system.

Postcodes covered: SG1, SG2

SSAIB CCTV, Intruder Alarm & Access Control Certificated
Fast Response Times
15+ Years Experience
Based in Luton, Covering London
Quick answer

Wireless fire alarms in Stevenage

We cover SG1, SG2 and nearby Hertfordshire areas.

Less disruption than hard-wired cabling.
Suitable for listed and occupied buildings.
Radio survey before installation.
Certified and maintained to the same fire alarm standards.
Cost / quote guidance

What affects the price?

Radio survey

Before quote

Confirms signal strength through the real building fabric.

Wireless install

Quoted design

Cost depends on device count, panels, boosters and access.

Maintenance

Planned servicing

Battery/device checks form part of the maintenance plan.

Get a wireless fire alarm quote
Near me coverage

We cover Stevenage, SG1, SG2 and the wider Hertfordshire area from our Luton base.

For urgent quotes, send the report, photos, plans or a short description. We will tell you what can be priced remotely and what needs a site check.

Professional wireless fire alarms across Stevenage

Stevenage is a major commercial centre in Hertfordshire, with significant business parks, industrial areas, and a large town centre. We serve clients across Stevenage, Knebworth, and Codicote, including businesses in the Gunnels Wood Road employment area and the town centre retail district.

Stevenage is dominated by Gunnels Wood Road — one of the largest single-occupier employment areas in Hertfordshire, home to GSK, Airbus and MBDA — alongside the town centre retail core and the Lister Hospital campus. Defence and pharma occupiers raise the security and audit-trail spec significantly above commercial baseline.

We specify wireless fire alarm systems in Stevenage after a radio survey confirms signal strength through the actual building fabric. They're the right answer where occupied premises can't take cabling disruption — and the certification standard is identical to wired systems under BS 5839. We also account for local compliance pressures in Hertfordshire, including defence and pharma occupiers on Gunnels Wood Road typically require BS 7858-vetted engineers, and access-control system audit trails meeting customer-specific data retention rules — both standards we operate to.

From first survey through to installation, certification and ongoing maintenance, we handle wireless fire alarms projects across the SG1, SG2 postcodes — typically reaching Stevenage sites within 30 minutes from our Luton base.

Who this service is for

  • Business park tenants in Stevenage
  • Industrial units in Stevenage
  • Retail premises in Stevenage
  • Schools and academies in Stevenage
  • Healthcare facilities in Stevenage

Coverage area

We cover Stevenage and all surrounding areas in Hertfordshire.

Postcodes covered
SG1SG2
Areas we regularly serve
Stevenage town centreGunnels Wood Road business areaStevenage Leisure ParkKnebworth
Sub-areas covered
KnebworthCodicoteAstonWalkernDatchworthSymonds GreenOld TownPin Green
From Luton HQ15 mi · 30 min
Population90k
Call for availability in your area

Local context — wireless fire alarms in Stevenage

Stevenage is dominated by Gunnels Wood Road — one of the largest single-occupier employment areas in Hertfordshire, home to GSK, Airbus and MBDA — alongside the town centre retail core and the Lister Hospital campus. Defence and pharma occupiers raise the security and audit-trail spec significantly above commercial baseline.

Regulatory note

Defence and pharma occupiers on Gunnels Wood Road typically require BS 7858-vetted engineers, and access-control system audit trails meeting customer-specific data retention rules — both standards we operate to.

What's included in our wireless fire alarms service

Wireless Control Panel

Fire alarm panel with radio receiver capable of monitoring all wireless devices across the building.

Wireless Detectors

Battery-powered smoke, heat, and multi-sensor detectors with radio communication to the panel.

Wireless Sounders

Radio-linked sounders and beacons providing audible and visual warning throughout the premises.

Wireless Call Points

Manual call points with radio communication, requiring no cabling to the panel.

BS 5839 Design

System designed to BS 5839 Part 1 standards with the appropriate category for your property.

Certification

Full installation certificate and compliance documentation for your fire risk assessment file.

Need wireless fire alarms in Stevenage? Speak to an engineer today.

Why choose DC Fire & Security for wireless fire alarms in Stevenage

No cabling required between devices
Ideal for listed and heritage buildings
Quick installation with minimal disruption
Fully BS 5839 compliant
Easy to expand and reconfigure
Supervised radio links for reliability
3-5 year battery life on most devices
Same level of protection as wired systems

How it works

01

Assessment

We survey your property and confirm wireless is the right solution for your building.

02

Design

We design the system to BS 5839 with radio signal testing at each device location.

03

Installation

Devices are mounted and configured with minimal drilling and no cable runs between devices.

04

Commissioning

Full system test including radio signal strength verification at every device.

05

Handover

You receive full certification and a maintenance schedule for ongoing compliance.

Wireless Fire Alarms projects in Stevenage

Wireless fire alarm and AOV system in Dunstable flats

Fire alarm and AOV system installed in block of flats, Dunstable

Fire alarm panel installation in Dunstable

Fire alarm control panel installed at block of flats

Fire alarm system servicing

Fire alarm servicing and maintenance

Example project
What a typical project looks like

What a typical wireless fire alarms project involves

Representative example: the scope most Stevenage clients ask us for

Challenge: The client needed improved fire detection but could not accept major cabling disruption through finished or occupied areas.
Solution: We specified a wireless fire alarm layout, tested radio signal strength and commissioned the system with full BS 5839 documentation.
Minimal disruption installation
Radio survey completed
BS 5839 documentation supplied
Maintenance schedule agreed

Wireless Fire Alarms equipment we use in Stevenage

Industry-leading products from trusted manufacturers

Hyfire Wireless System

Fully wireless fire alarm with mesh network technology and BS 5839 compliance

Hochiki FIREwave

Radio-linked fire detection devices with supervised communication

EMS FireCell

Wireless fire alarm system designed for heritage and listed buildings

Apollo Wireless Detectors

Battery-powered wireless smoke and heat detectors with 5-year battery life

Wireless Sounders

Radio-linked alert devices requiring no cabling between panel and sounder

Signal Repeaters

Range extenders for reliable coverage across large or complex buildings

Frequently asked questions about wireless fire alarms in Stevenage

Can you quote for a fire alarm in commercial premises, and how much does it cost?
Yes. We design and install fire alarms for shops, offices, warehouses, schools, care homes and blocks to BS 5839-1. The cost depends on the size of the building, the category of protection and whether a wireless or wired system suits. We do not publish a price list, as every building differs; send a floor plan and photos and we price it.
Can you upgrade or replace an existing fire alarm to current standards?
Yes. We keep any parts that are compatible and in good order, and replace the panel, detectors or sounders that are not. The upgraded or new system is commissioned and certified to BS 5839-1. Send photos of the panel, a few detectors and a floor plan, and we tell you whether an upgrade or a replacement makes more sense.
Can you fix a fire alarm panel fault or a device error?
Yes. We diagnose and repair panel faults, device errors, earth faults and detectors that will not clear, on most common panels, including resetting access passwords. Fault visits are charged as a call-out covering the first hour and diagnosis. Send a photo of the panel display and its make and model so the engineer brings the right parts.
Will I get a fire alarm certificate, and is it accepted for an HMO licence?
Yes. Every system we install is handed over with BS 5839-1 design, installation and commissioning certificates and a logbook. For HMOs, the system is certified to the grade and category your licence or fire risk assessment asks for. Check the licence wording allows an equivalent system where it names a domestic grade.
Does a block of flats need a communal fire alarm, and can you quote for one?
It depends on the layout and the fire risk assessment. Many purpose-built blocks follow a stay-put strategy without a communal alarm, while converted houses often need a linked system. Where one is needed, we design and install it to BS 5839-1. Send the fire risk assessment, a floor plan and photos and we price it.
Can you price fire and security systems for a tender or refurbishment?
Yes. We price fire alarms, CCTV, access control, door entry and fire doors for refurbishments and new builds from drawings and specifications. Send the tender documents, drawings and programme. We return a priced scope with any exclusions clearly listed, and provide the design, installation and commissioning paperwork on completion.

Get a free wireless fire alarms quote in Stevenage

Our local engineers cover Stevenage and all SG1, SG2 postcodes. Send us photos, a report or drawings and we will come back with a written quote.

Request a free wireless fire alarms quote

Free no-obligation quote for Stevenage and surrounding areas

No spam. We'll only use these details to respond to your enquiry.

Want us to quote for remedials or any other works? Email your specifications or requirements to info@dcsecurity.co.uk — the inbox is monitored daily.

24-hour response
SSAIB-certificated for CCTV, intruder alarms and access control
Based in Luton, covering London