DC Fire & Security logoDC Fire & Security
Stevenage · Hertfordshire

Fire Stopping in Stevenage

Fire stopping in Stevenage seals the gaps where cables, pipes and ducts pass through fire-resisting walls and floors, using a product system tested for that service, wall and gap size. Each seal is photographed, labelled and recorded, so you hold proof the fire resistance was restored for your fire risk assessor, insurer or building control.

Postcodes covered: SG1, SG2

SSAIB CCTV, Intruder Alarm & Access Control Certificated
Fast Response Times
15+ Years Experience
Based in Luton, Covering London
Quick answer

Fire stopping in Stevenage

We cover SG1, SG2 and nearby Hertfordshire areas.

Service penetration sealing.
Risers, voids and compartment lines checked.
Tested products used.
Photo evidence and product records supplied.
Cost / quote guidance

What affects the price?

Survey / inspection

Scoped quote

We identify penetrations, risers and breached compartment lines.

Remedial sealing

Per location

Pricing depends on access, substrate and tested product system.

Evidence pack

Included

Photos and product details support your golden-thread records.

Get a fire stopping quote
Near me coverage

We cover Stevenage, SG1, SG2 and the wider Hertfordshire area from our Luton base.

For urgent quotes, send the report, photos, plans or a short description. We will tell you what can be priced remotely and what needs a site check.

Professional fire stopping across Stevenage

Stevenage is a major commercial centre in Hertfordshire, with significant business parks, industrial areas, and a large town centre. We serve clients across Stevenage, Knebworth, and Codicote, including businesses in the Gunnels Wood Road employment area and the town centre retail district.

Stevenage is dominated by Gunnels Wood Road — one of the largest single-occupier employment areas in Hertfordshire, home to GSK, Airbus and MBDA — alongside the town centre retail core and the Lister Hospital campus. Defence and pharma occupiers raise the security and audit-trail spec significantly above commercial baseline.

Fire stopping in Stevenage focuses on the hidden routes where fire and smoke spread: service penetrations, risers, ceiling voids and compartment lines. We document completed works clearly so responsible persons can evidence what has been sealed and where. We also account for local compliance pressures in Hertfordshire, including defence and pharma occupiers on Gunnels Wood Road typically require BS 7858-vetted engineers, and access-control system audit trails meeting customer-specific data retention rules — both standards we operate to.

Whether it's a new install, an upgrade, or taking over the servicing of a system somebody else fitted, fire stopping is week-in, week-out work for us across Stevenage and the wider Hertfordshire area.

Who this service is for

  • Business park tenants in Stevenage
  • Industrial units in Stevenage
  • Retail premises in Stevenage
  • Schools and academies in Stevenage
  • Healthcare facilities in Stevenage

Coverage area

We cover Stevenage and all surrounding areas in Hertfordshire.

Postcodes covered
SG1SG2
Areas we regularly serve
Stevenage town centreGunnels Wood Road business areaStevenage Leisure ParkKnebworth
Sub-areas covered
KnebworthCodicoteAstonWalkernDatchworthSymonds GreenOld TownPin Green
From Luton HQ15 mi · 30 min
Population90k
Call for availability in your area

Local context — fire stopping in Stevenage

Stevenage is dominated by Gunnels Wood Road — one of the largest single-occupier employment areas in Hertfordshire, home to GSK, Airbus and MBDA — alongside the town centre retail core and the Lister Hospital campus. Defence and pharma occupiers raise the security and audit-trail spec significantly above commercial baseline.

Certification

Fire stopping is installed by our FIRAS-certificated contractors using tested products, and every seal is photographed and recorded. The third-party certificate goes in your handover pack. That is the evidence managing agents, councils and building control usually ask for.

Regulatory note

Defence and pharma occupiers on Gunnels Wood Road typically require BS 7858-vetted engineers, and access-control system audit trails meeting customer-specific data retention rules — both standards we operate to.

Need fire stopping in Stevenage? Speak to an engineer today.

How it works

01

Scoping

We confirm the scope from a compartmentation survey, drawings or a site walk.

02

System Selection

We select the third-party tested system for each substrate / service / fire-rating combination.

03

Installation

Installers carry out the works to the tested detail, photographing each penetration.

04

Tagging & Register

Each penetration is asset-tagged on site and entered into the digital firestopping register.

05

Certification

Installer certification issued and the register handed over for the building safety case.

Frequently asked questions about fire stopping in Stevenage

What do you need to quote for fire stopping, and do you need to visit?
Send photos of each location, the wall or floor type, what passes through it and the rough size of each gap, plus any survey or fire risk assessment. Smaller jobs can usually be priced from that. Where a survey is needed to find and record the breaches, it is a paid service with its own report.
Can you build a fire-rated enclosure around electric meters?
Yes. Meter cupboards in shared areas often need a fire-rated enclosure built from tested boards, with a fire-rated access door or hatch, and sealed around the cables and pipes passing through. We build it so meters can still be read. Send photos and sizes of the meter area and we price it.
Can you fire stop around lift doors and lift shaft voids?
Yes. The cost depends on the size of the gaps, the surrounding construction and access to the shaft, which may need the lift company present. We price from photos of the gaps and the lift surround, and work in the shaft is coordinated with your lift contractor.
Can you replace timber riser covers or loft hatches with fire-rated ones?
Yes. We replace non-rated riser panels and loft hatches with tested fire-rated access hatches or panels, fitted with the right seals and fixings. Send photos and sizes of each opening, plus the rating needed if you know it, and we price each one.
Can fire stopping be done out of hours or at weekends?
Yes, fire stopping can be planned outside trading hours where the building needs it, such as shops and offices. Tell us when you ask for the price, as out-of-hours work can affect the cost and needs access arranged in advance.
How quickly can you get a quote back to me?
Fire door, inspection and service quotes usually go back the same day once we have photos, the report and the address. New systems, and jobs that need a manufacturer's or specialist price, usually take a few working days. We tell you when to expect it, and the fastest route is to send everything in one email.

Get a free fire stopping quote in Stevenage

Our local engineers cover Stevenage and all SG1, SG2 postcodes. Send us photos, a report or drawings and we will come back with a written quote.

Request a free fire stopping quote

Free no-obligation quote for Stevenage and surrounding areas

No spam. We'll only use these details to respond to your enquiry.

Want us to quote for remedials or any other works? Email your specifications or requirements to info@dcsecurity.co.uk — the inbox is monitored daily.

24-hour response
SSAIB-certificated for CCTV, intruder alarms and access control
Based in Luton, covering London