DC Fire & Security logoDC Fire & Security
Stevenage · Hertfordshire

Fire Door Inspections in Stevenage

A fire door inspection in Stevenage is a door-by-door check of each leaf, frame, gap, seal, hinge, closer and sign against BS 8214 and the door certification. Every door is photographed and given a pass or fail, and you get a priority repair list you can act on yourself or pass to a contractor.

Postcodes covered: SG1, SG2

SSAIB CCTV, Intruder Alarm & Access Control Certificated
Fast Response Times
15+ Years Experience
Based in Luton, Covering London
Quick answer

Fire door inspections in Stevenage

We cover SG1, SG2 and nearby Hertfordshire areas.

Photographic evidence for each failed item.
Defect grading by risk and priority.
Practical remedial recommendations, not just pass/fail notes.
Can be followed by itemised remedial pricing.
Cost / quote guidance

What affects the price?

Small building

£250+VAT

Typical minimum commercial visit where access is straightforward and a photographic defect report is required.

Larger blocks / schools

Priced by door count

Final cost depends on number of doors, access, reporting format and whether flat entrance doors need appointments.

Remedial schedule

Included

Defects are listed clearly by priority so repairs can be quoted and closed out door by door.

Book a fire door inspection
Near me coverage

We cover Stevenage, SG1, SG2 and the wider Hertfordshire area from our Luton base.

For urgent quotes, send the report, photos, plans or a short description. We will tell you what can be priced remotely and what needs a site check.

Fire door inspection cost in Stevenage

Fire door inspections, reports and remedial schedules in Stevenage

If you need a fire door inspection in Stevenage, we check each doorset properly: perimeter gaps, threshold gaps, hinges, closers, latch, glazing, seals, signage, frame condition and obvious evidence of certification.

Inspections start from £250+VAT where access is straightforward. Larger schools, HMOs, blocks of flats and commercial buildings are priced by door count, access arrangements and reporting format. Every failed item is photographed and graded so you can quote remedials in priority order.

For residential blocks over 11 metres, quarterly common-parts checks and annual flat entrance door checks may apply under the Fire Safety (England) Regulations 2022. We format reports so managing agents, responsible persons, insurers and fire risk assessors can act on them quickly.

Inspection output

  • Door-by-door photographic condition report
  • Gap measurements and closer/latch test notes
  • Defects graded as urgent, remedial or advisory
  • Remedial schedule ready for itemised pricing
  • Coverage across Stevenage, SG1, SG2 and nearby Hertfordshire areas
Get a fire door inspection quote

Professional fire door inspections across Stevenage

Stevenage is a major commercial centre in Hertfordshire, with significant business parks, industrial areas, and a large town centre. We serve clients across Stevenage, Knebworth, and Codicote, including businesses in the Gunnels Wood Road employment area and the town centre retail district.

Stevenage is dominated by Gunnels Wood Road — one of the largest single-occupier employment areas in Hertfordshire, home to GSK, Airbus and MBDA — alongside the town centre retail core and the Lister Hospital campus. Defence and pharma occupiers raise the security and audit-trail spec significantly above commercial baseline.

Our Stevenage fire door inspections record every door against BS 8214 and manufacturer criteria — gaps, seals, closers, glazing, signage — with photographs and a defect schedule the responsible person can act on immediately. We also account for local compliance pressures in Hertfordshire, including defence and pharma occupiers on Gunnels Wood Road typically require BS 7858-vetted engineers, and access-control system audit trails meeting customer-specific data retention rules — both standards we operate to.

From first survey through to installation, certification and ongoing maintenance, we handle fire door inspections projects across the SG1, SG2 postcodes — typically reaching Stevenage sites within 30 minutes from our Luton base.

Who this service is for

  • Business park tenants in Stevenage
  • Industrial units in Stevenage
  • Retail premises in Stevenage
  • Schools and academies in Stevenage
  • Healthcare facilities in Stevenage

Coverage area

We cover Stevenage and all surrounding areas in Hertfordshire.

Postcodes covered
SG1SG2
Areas we regularly serve
Stevenage town centreGunnels Wood Road business areaStevenage Leisure ParkKnebworth
Sub-areas covered
KnebworthCodicoteAstonWalkernDatchworthSymonds GreenOld TownPin Green
From Luton HQ15 mi · 30 min
Population90k
Call for availability in your area

Local context — fire door inspections in Stevenage

Stevenage is dominated by Gunnels Wood Road — one of the largest single-occupier employment areas in Hertfordshire, home to GSK, Airbus and MBDA — alongside the town centre retail core and the Lister Hospital campus. Defence and pharma occupiers raise the security and audit-trail spec significantly above commercial baseline.

In Stevenage we have inspected and sealed doors on a residential block of flats, fitting cold smoke seals where its fire risk assessment found gaps, with a written report on the door. Our Luton base is about 14 miles away, around 25 minutes down the A1(M).

Certification

Our fire door inspections follow BS 8214 and the government's fire door guidance, with photos of every door. When a door needs work and a third-party certificate is required, the repairs or new doorsets are done by our BM TRADA Q-Mark certificated contractors, and the certificate goes in your fire safety file. That is the evidence managing agents, councils and building control usually ask for.

Regulatory note

Defence and pharma occupiers on Gunnels Wood Road typically require BS 7858-vetted engineers, and access-control system audit trails meeting customer-specific data retention rules — both standards we operate to.

Need fire door inspections in Stevenage? Speak to an engineer today.

How it works

01

Booking

We schedule the inspection at a time that suits your operations.

02

On-Site Inspection

Our inspector examines every fire door assembly in your building.

03

Report Preparation

We prepare a detailed report with photographs, gradings, and recommendations.

04

Report Delivery

You receive the full report within 48 hours of the inspection.

05

Remedial Support

We can carry out any remedial work or replacements identified in the report.

Frequently asked questions about fire door inspections in Stevenage

How much does a fire door inspection cost?
Fire door inspections start from about £250 + VAT for a small building. Larger buildings are priced on the number of doors and how access works: doors we can reach in one go cost less to inspect than flat doors that need residents at home. The price includes a photo report with every door graded and a list of what to fix.
Can you carry out the repairs as well as the fire door inspection?
Yes. We inspect, repair and replace fire doors, so a failed door does not mean finding a second firm. After the inspection you get a report, and if you want us to do the work we price each door from it. You are free to take the report to another contractor if you prefer.
How long does a fire door inspection take, and how soon can you come?
A small building with a handful of doors usually takes a couple of hours on site; larger buildings take a day or more. We price inspections from the address, door count and access details, usually the same day. Inspections are paid when booked, and we confirm the date once payment clears.
Can a fire door inspection be combined with a compartmentation survey?
Yes, they can be booked for the same building and planned together, but they are separate services with separate reports. The door inspection grades every fire door. The compartmentation survey checks the walls, floors and ceilings that form fire compartments. We can price them together, or one without the other so you can compare.
Can my inspection report be updated once the defects are fixed?
Yes. Once the defects are fixed, the doors can be rechecked and the record updated so you can show the actions are closed. If we did the repairs, the check after the work and the certificate are included. If someone else did the work, we can re-inspect those doors as a separate visit and issue an updated report.
How quickly can you start, and what is the lead time from order to fitting?
It depends on the job. Inspections and assessments are booked as soon as payment clears, at the first date that suits both of us. Repairs and installations need parts or doors ordered first, so we give the expected start with the quote and confirm it once the deposit clears. If you have a deadline, tell us at the start.

Get a free fire door inspections quote in Stevenage

Our local engineers cover Stevenage and all SG1, SG2 postcodes. Send us photos, a report or drawings and we will come back with a written quote.

Request a free fire door inspections quote

Free no-obligation quote for Stevenage and surrounding areas

No spam. We'll only use these details to respond to your enquiry.

Want us to quote for remedials or any other works? Email your specifications or requirements to info@dcsecurity.co.uk — the inbox is monitored daily.

24-hour response
SSAIB-certificated for CCTV, intruder alarms and access control
Based in Luton, covering London