DC Fire & Security logoDC Fire & Security
Hitchin · Hertfordshire

Wireless Fire Alarms in Hitchin

A wireless fire alarm in Hitchin uses radio-linked detectors and call points instead of cabling, so it suits occupied buildings, listed buildings and sites where new cables would be disruptive. It is still designed, commissioned and serviced to BS 5839-1 and EN 54-25, with the same category and cause and effect as a wired system.

Postcodes covered: SG4, SG5

SSAIB CCTV, Intruder Alarm & Access Control Certificated
Fast Response Times
15+ Years Experience
Based in Luton, Covering London
Quick answer

Wireless fire alarms in Hitchin

We cover SG4, SG5 and nearby Hertfordshire areas.

Less disruption than hard-wired cabling.
Suitable for listed and occupied buildings.
Radio survey before installation.
Certified and maintained to the same fire alarm standards.
Cost / quote guidance

What affects the price?

Radio survey

Before quote

Confirms signal strength through the real building fabric.

Wireless install

Quoted design

Cost depends on device count, panels, boosters and access.

Maintenance

Planned servicing

Battery/device checks form part of the maintenance plan.

Get a wireless fire alarm quote
Near me coverage

We cover Hitchin, SG4, SG5 and the wider Hertfordshire area from our Luton base.

For urgent quotes, send the report, photos, plans or a short description. We will tell you what can be priced remotely and what needs a site check.

Professional wireless fire alarms across Hitchin

Hitchin is a historic market town in North Hertfordshire with a thriving mix of independent businesses, listed buildings, and modern commercial premises. Our engineers are experienced working in conservation areas and older buildings where specialist solutions such as wireless fire alarms are often required.

Hitchin's commercial fabric is dominated by Grade-II-listed buildings around the market square, Churchgate, and Bancroft. Most installations here are wireless fire alarms or surface-cabled discreet CCTV — modern intrusive cabling routinely fails listed building consent.

Hitchin's listed Georgian and Victorian commercial premises around Bancroft and Churchgate make wireless fire alarms (Hochiki/EMS) the only practical compliance route — surface conduit isn't accepted by conservation officers.

Whether it's a new install, an upgrade, or taking over the servicing of a system somebody else fitted, wireless fire alarms is week-in, week-out work for us across Hitchin and the wider Hertfordshire area.

Who this service is for

  • Independent retailers in Hitchin
  • Listed and heritage buildings in Hitchin
  • Schools in Hitchin
  • Pubs and restaurants in Hitchin
  • Residential conversions in Hitchin

Coverage area

We cover Hitchin and all surrounding areas in Hertfordshire.

Postcodes covered
SG4SG5
Areas we regularly serve
Hitchin town centreHitchin MarketChurchgateBancroft
Sub-areas covered
PirtonIcklefordOffleyHolwellPrestonCharltonWalsworth
From Luton HQ10 mi · 25 min
Population33k
Call for availability in your area

Local context — wireless fire alarms in Hitchin

Hitchin's commercial fabric is dominated by Grade-II-listed buildings around the market square, Churchgate, and Bancroft. Most installations here are wireless fire alarms or surface-cabled discreet CCTV — modern intrusive cabling routinely fails listed building consent.

Regulatory note

North Herts Council's conservation officers regularly reject standard hardwired fire alarms in listed premises; wireless systems with concealed sounders are typically required to gain listed building consent.

What's included in our wireless fire alarms service

Wireless Control Panel

Fire alarm panel with radio receiver capable of monitoring all wireless devices across the building.

Wireless Detectors

Battery-powered smoke, heat, and multi-sensor detectors with radio communication to the panel.

Wireless Sounders

Radio-linked sounders and beacons providing audible and visual warning throughout the premises.

Wireless Call Points

Manual call points with radio communication, requiring no cabling to the panel.

BS 5839 Design

System designed to BS 5839 Part 1 standards with the appropriate category for your property.

Certification

Full installation certificate and compliance documentation for your fire risk assessment file.

Need wireless fire alarms in Hitchin? Speak to an engineer today.

Why choose DC Fire & Security for wireless fire alarms in Hitchin

No cabling required between devices
Ideal for listed and heritage buildings
Quick installation with minimal disruption
Fully BS 5839 compliant
Easy to expand and reconfigure
Supervised radio links for reliability
3-5 year battery life on most devices
Same level of protection as wired systems

How it works

01

Assessment

We survey your property and confirm wireless is the right solution for your building.

02

Design

We design the system to BS 5839 with radio signal testing at each device location.

03

Installation

Devices are mounted and configured with minimal drilling and no cable runs between devices.

04

Commissioning

Full system test including radio signal strength verification at every device.

05

Handover

You receive full certification and a maintenance schedule for ongoing compliance.

Wireless Fire Alarms projects in Hitchin

Wireless fire alarm and AOV system in Dunstable flats

Fire alarm and AOV system installed in block of flats, Dunstable

Fire alarm panel installation in Dunstable

Fire alarm control panel installed at block of flats

Fire alarm system servicing

Fire alarm servicing and maintenance

Example project
What a typical project looks like

What a typical wireless fire alarms project involves

Representative example: the scope most Hitchin clients ask us for

Challenge: The client needed improved fire detection but could not accept major cabling disruption through finished or occupied areas.
Solution: We specified a wireless fire alarm layout, tested radio signal strength and commissioned the system with full BS 5839 documentation.
Minimal disruption installation
Radio survey completed
BS 5839 documentation supplied
Maintenance schedule agreed

Wireless Fire Alarms equipment we use in Hitchin

Industry-leading products from trusted manufacturers

Hyfire Wireless System

Fully wireless fire alarm with mesh network technology and BS 5839 compliance

Hochiki FIREwave

Radio-linked fire detection devices with supervised communication

EMS FireCell

Wireless fire alarm system designed for heritage and listed buildings

Apollo Wireless Detectors

Battery-powered wireless smoke and heat detectors with 5-year battery life

Wireless Sounders

Radio-linked alert devices requiring no cabling between panel and sounder

Signal Repeaters

Range extenders for reliable coverage across large or complex buildings

Frequently asked questions about wireless fire alarms in Hitchin

Can you quote for a fire alarm in commercial premises, and how much does it cost?
Yes. We design and install fire alarms for shops, offices, warehouses, schools, care homes and blocks to BS 5839-1. The cost depends on the size of the building, the category of protection and whether a wireless or wired system suits. We do not publish a price list, as every building differs; send a floor plan and photos and we price it.
Can you upgrade or replace an existing fire alarm to current standards?
Yes. We keep any parts that are compatible and in good order, and replace the panel, detectors or sounders that are not. The upgraded or new system is commissioned and certified to BS 5839-1. Send photos of the panel, a few detectors and a floor plan, and we tell you whether an upgrade or a replacement makes more sense.
Can a wireless fire alarm replace a waking watch?
Wireless fire alarms can often be installed quickly in occupied buildings, which is why they are used to replace a waking watch. Whether the waking watch can stand down is for your fire risk assessor or fire engineer, and the fire service, to agree. Send the building details and their requirements, and we price the design, installation and servicing.
Can adjoining shops or units be connected to one fire alarm?
Yes. Adjoining units can be linked so a fire in one sounds the alarm in the others, or networked so each keeps its own panel. Which suits depends on the fire risk assessment, how the units are occupied and who is responsible for each. Wireless systems make linking easier where running cables between units is difficult.
Can you arrange a fire risk assessment alongside a new fire alarm?
Yes. We arrange fire risk assessments as a separate service, and can book one alongside the alarm work so the assessment reflects the system in place. The assessment is priced and reported on its own. Many landlords book the assessment first, as it confirms the alarm grade and category needed.
Do you charge for a site visit before giving a quote?
Quotes are free when we can price from photos, plans, reports and sizes, which covers most jobs. Inspections, surveys and fire risk assessments are paid services, because the report is what you are buying. Fault visits are charged as a call-out, with the rate given before you book. On larger installations we may visit to price, and say up front if any charge applies.

Get a free wireless fire alarms quote in Hitchin

Our local engineers cover Hitchin and all SG4, SG5 postcodes. Send us photos, a report or drawings and we will come back with a written quote.

Request a free wireless fire alarms quote

Free no-obligation quote for Hitchin and surrounding areas

No spam. We'll only use these details to respond to your enquiry.

Want us to quote for remedials or any other works? Email your specifications or requirements to info@dcsecurity.co.uk — the inbox is monitored daily.

24-hour response
SSAIB-certificated for CCTV, intruder alarms and access control
Based in Luton, covering London