DC Fire & Security logoDC Fire & Security
Oxford · Oxfordshire

Wireless Fire Alarms in Oxford

A wireless fire alarm in Oxford uses radio-linked detectors and call points instead of cabling, so it suits occupied buildings, listed buildings and sites where new cables would be disruptive. It is still designed, commissioned and serviced to BS 5839-1 and EN 54-25, with the same category and cause and effect as a wired system.

Postcodes covered: OX1, OX2, OX3, OX4, OX5, OX20

SSAIB CCTV, Intruder Alarm & Access Control Certificated
Fast Response Times
15+ Years Experience
Based in Luton, Covering London
Quick answer

Wireless fire alarms in Oxford

We cover OX1, OX2, OX3, OX4, OX5, OX20 and nearby Oxfordshire areas.

Less disruption than hard-wired cabling.
Suitable for listed and occupied buildings.
Radio survey before installation.
Certified and maintained to the same fire alarm standards.
Cost / quote guidance

What affects the price?

Radio survey

Before quote

Confirms signal strength through the real building fabric.

Wireless install

Quoted design

Cost depends on device count, panels, boosters and access.

Maintenance

Planned servicing

Battery/device checks form part of the maintenance plan.

Get a wireless fire alarm quote
Near me coverage

We cover Oxford, OX1, OX2, OX3, OX4, OX5, OX20 and the wider Oxfordshire area from our Luton base.

For urgent quotes, send the report, photos, plans or a short description. We will tell you what can be priced remotely and what needs a site check.

Professional wireless fire alarms across Oxford

Oxford is renowned for its university and is a thriving commercial centre with a growing technology sector. We work with university colleges, research facilities, hospitals, and businesses across the city, including the Oxford Science Park, Headington's hospitals, and the revived Mini plant at Cowley.

Oxford's economy combines the listed-college estate of the central city with the John Radcliffe and Churchill hospital campuses in Headington, the Mini plant at Cowley, and the Oxford Science Park. Listed-building consent and live-occupier working hours are the binding constraints on most installations.

Oxford colleges almost universally rule out hardwired fire alarms in chambers and listed dining halls — wireless Hochiki ESP and EMS systems are the practical compliance route.

Whether it's a new install, an upgrade, or taking over the servicing of a system somebody else fitted, wireless fire alarms is week-in, week-out work for us across Oxford and the wider Oxfordshire area.

Who this service is for

  • University colleges in Oxford
  • Hospitals and research institutes in Oxford
  • Science and business parks in Oxford
  • Manufacturing facilities in Oxford
  • Hotels and tourist attractions in Oxford
  • Schools and academies in Oxford

Coverage area

We cover Oxford and all surrounding areas in Oxfordshire.

Postcodes covered
OX1OX2OX3OX4OX5OX20
Areas we regularly serve
Oxford city centreUniversity of Oxford collegesOxford Science ParkJohn Radcliffe HospitalOxford Business ParkMini Plant Oxford
Sub-areas covered
HeadingtonCowleySummertownJerichoIffleyMarstonBotleyKidlington
From Luton HQ46 mi · 70 min
Population162k
Call for availability in your area

Local context — wireless fire alarms in Oxford

Oxford's economy combines the listed-college estate of the central city with the John Radcliffe and Churchill hospital campuses in Headington, the Mini plant at Cowley, and the Oxford Science Park. Listed-building consent and live-occupier working hours are the binding constraints on most installations.

Regulatory note

Oxford City Council's listed-building team and the Oxford Preservation Trust review external installations on the central conservation area in detail; concealed cabling and heritage-finish housings are typically required for compliance.

What's included in our wireless fire alarms service

Wireless Control Panel

Fire alarm panel with radio receiver capable of monitoring all wireless devices across the building.

Wireless Detectors

Battery-powered smoke, heat, and multi-sensor detectors with radio communication to the panel.

Wireless Sounders

Radio-linked sounders and beacons providing audible and visual warning throughout the premises.

Wireless Call Points

Manual call points with radio communication, requiring no cabling to the panel.

BS 5839 Design

System designed to BS 5839 Part 1 standards with the appropriate category for your property.

Certification

Full installation certificate and compliance documentation for your fire risk assessment file.

Need wireless fire alarms in Oxford? Speak to an engineer today.

Why choose DC Fire & Security for wireless fire alarms in Oxford

No cabling required between devices
Ideal for listed and heritage buildings
Quick installation with minimal disruption
Fully BS 5839 compliant
Easy to expand and reconfigure
Supervised radio links for reliability
3-5 year battery life on most devices
Same level of protection as wired systems

How it works

01

Assessment

We survey your property and confirm wireless is the right solution for your building.

02

Design

We design the system to BS 5839 with radio signal testing at each device location.

03

Installation

Devices are mounted and configured with minimal drilling and no cable runs between devices.

04

Commissioning

Full system test including radio signal strength verification at every device.

05

Handover

You receive full certification and a maintenance schedule for ongoing compliance.

Wireless Fire Alarms projects in Oxford

Wireless fire alarm and AOV system in Dunstable flats

Fire alarm and AOV system installed in block of flats, Dunstable

Fire alarm panel installation in Dunstable

Fire alarm control panel installed at block of flats

Fire alarm system servicing

Fire alarm servicing and maintenance

Example project
What a typical project looks like

What a typical wireless fire alarms project involves

Representative example: the scope most Oxford clients ask us for

Challenge: The client needed improved fire detection but could not accept major cabling disruption through finished or occupied areas.
Solution: We specified a wireless fire alarm layout, tested radio signal strength and commissioned the system with full BS 5839 documentation.
Minimal disruption installation
Radio survey completed
BS 5839 documentation supplied
Maintenance schedule agreed

Wireless Fire Alarms equipment we use in Oxford

Industry-leading products from trusted manufacturers

Hyfire Wireless System

Fully wireless fire alarm with mesh network technology and BS 5839 compliance

Hochiki FIREwave

Radio-linked fire detection devices with supervised communication

EMS FireCell

Wireless fire alarm system designed for heritage and listed buildings

Apollo Wireless Detectors

Battery-powered wireless smoke and heat detectors with 5-year battery life

Wireless Sounders

Radio-linked alert devices requiring no cabling between panel and sounder

Signal Repeaters

Range extenders for reliable coverage across large or complex buildings

Frequently asked questions about wireless fire alarms in Oxford

Can you quote for a fire alarm in commercial premises, and how much does it cost?
Yes. We design and install fire alarms for shops, offices, warehouses, schools, care homes and blocks to BS 5839-1. The cost depends on the size of the building, the category of protection and whether a wireless or wired system suits. We do not publish a price list, as every building differs; send a floor plan and photos and we price it.
Can you upgrade or replace an existing fire alarm to current standards?
Yes. We keep any parts that are compatible and in good order, and replace the panel, detectors or sounders that are not. The upgraded or new system is commissioned and certified to BS 5839-1. Send photos of the panel, a few detectors and a floor plan, and we tell you whether an upgrade or a replacement makes more sense.
Does fire alarm commissioning include cause and effect testing?
Yes. Commissioning includes testing every detector, call point and sounder, and checking the cause and effect so each input triggers the right outputs, such as sounders, door releases or interfaces. The results are recorded on the commissioning certificate and handed over with the logbook.
How much more does an L1 fire alarm cost than an L2?
An L1 system covers all areas, so it has more detectors than L2, which covers escape routes, rooms opening onto them and higher-risk rooms. The extra cost is mostly the additional detectors and their installation, so it depends on how many rooms L2 leaves out. We can price both from the same drawings so you see the difference.
What do you need to quote for a fire alarm, and do you need to visit first?
Send a floor plan or rough sketch with room uses, photos of any existing panel and detectors, the number of floors, how the building is used and any fire risk assessment or licence requirement. Most systems can be priced from that. A full design survey sold as a document is a paid service, and fault visits are charged as a call-out.
Can a school deal with you directly for fire safety work?
Yes. Schools and academies can instruct us directly, or through their council's or trust's approved route. Dealing direct gives you one point of contact for the quote, booking, works and certificates. If your trust needs us on an approved contractor list, tell us what it requires.

Get a free wireless fire alarms quote in Oxford

Our local engineers cover Oxford and all OX1, OX2, OX3, OX4, OX5, OX20 postcodes. Send us photos, a report or drawings and we will come back with a written quote.

Request a free wireless fire alarms quote

Free no-obligation quote for Oxford and surrounding areas

No spam. We'll only use these details to respond to your enquiry.

Want us to quote for remedials or any other works? Email your specifications or requirements to info@dcsecurity.co.uk — the inbox is monitored daily.

24-hour response
SSAIB-certificated for CCTV, intruder alarms and access control
Based in Luton, covering London