DC Fire & Security logoDC Fire & Security
Oxford · Oxfordshire

Fire Stopping in Oxford

Fire stopping in Oxford seals the gaps where cables, pipes and ducts pass through fire-resisting walls and floors, using a product system tested for that service, wall and gap size. Each seal is photographed, labelled and recorded, so you hold proof the fire resistance was restored for your fire risk assessor, insurer or building control.

Postcodes covered: OX1, OX2, OX3, OX4, OX5, OX20

SSAIB CCTV, Intruder Alarm & Access Control Certificated
Fast Response Times
15+ Years Experience
Based in Luton, Covering London
Quick answer

Fire stopping in Oxford

We cover OX1, OX2, OX3, OX4, OX5, OX20 and nearby Oxfordshire areas.

Service penetration sealing.
Risers, voids and compartment lines checked.
Tested products used.
Photo evidence and product records supplied.
Cost / quote guidance

What affects the price?

Survey / inspection

Scoped quote

We identify penetrations, risers and breached compartment lines.

Remedial sealing

Per location

Pricing depends on access, substrate and tested product system.

Evidence pack

Included

Photos and product details support your golden-thread records.

Get a fire stopping quote
Near me coverage

We cover Oxford, OX1, OX2, OX3, OX4, OX5, OX20 and the wider Oxfordshire area from our Luton base.

For urgent quotes, send the report, photos, plans or a short description. We will tell you what can be priced remotely and what needs a site check.

Professional fire stopping across Oxford

Oxford is renowned for its university and is a thriving commercial centre with a growing technology sector. We work with university colleges, research facilities, hospitals, and businesses across the city, including the Oxford Science Park, Headington's hospitals, and the revived Mini plant at Cowley.

Oxford's economy combines the listed-college estate of the central city with the John Radcliffe and Churchill hospital campuses in Headington, the Mini plant at Cowley, and the Oxford Science Park. Listed-building consent and live-occupier working hours are the binding constraints on most installations.

Fire stopping surveys in Oxford almost always find the same culprits — unsealed cable and pipe penetrations left by previous contractors, open risers and breached ceiling voids. We seal them with tested systems and photograph every completed location. We also account for local compliance pressures in Oxfordshire, including oxford City Council's listed-building team and the Oxford Preservation Trust review external installations on the central conservation area in detail; concealed cabling and heritage-finish housings are typically required for compliance.

From first survey through to installation, certification and ongoing maintenance, we handle fire stopping projects across the OX1, OX2, OX3, OX4, OX5, OX20 postcodes — typically reaching Oxford sites within 70 minutes from our Luton base.

Who this service is for

  • University colleges in Oxford
  • Hospitals and research institutes in Oxford
  • Science and business parks in Oxford
  • Manufacturing facilities in Oxford
  • Hotels and tourist attractions in Oxford
  • Schools and academies in Oxford

Coverage area

We cover Oxford and all surrounding areas in Oxfordshire.

Postcodes covered
OX1OX2OX3OX4OX5OX20
Areas we regularly serve
Oxford city centreUniversity of Oxford collegesOxford Science ParkJohn Radcliffe HospitalOxford Business ParkMini Plant Oxford
Sub-areas covered
HeadingtonCowleySummertownJerichoIffleyMarstonBotleyKidlington
From Luton HQ46 mi · 70 min
Population162k
Call for availability in your area

Local context — fire stopping in Oxford

Oxford's economy combines the listed-college estate of the central city with the John Radcliffe and Churchill hospital campuses in Headington, the Mini plant at Cowley, and the Oxford Science Park. Listed-building consent and live-occupier working hours are the binding constraints on most installations.

Certification

Fire stopping is installed by our FIRAS-certificated contractors using tested products, and every seal is photographed and recorded. The third-party certificate goes in your handover pack. That is the evidence managing agents, councils and building control usually ask for.

Regulatory note

Oxford City Council's listed-building team and the Oxford Preservation Trust review external installations on the central conservation area in detail; concealed cabling and heritage-finish housings are typically required for compliance.

Need fire stopping in Oxford? Speak to an engineer today.

How it works

01

Scoping

We confirm the scope from a compartmentation survey, drawings or a site walk.

02

System Selection

We select the third-party tested system for each substrate / service / fire-rating combination.

03

Installation

Installers carry out the works to the tested detail, photographing each penetration.

04

Tagging & Register

Each penetration is asset-tagged on site and entered into the digital firestopping register.

05

Certification

Installer certification issued and the register handed over for the building safety case.

Frequently asked questions about fire stopping in Oxford

What do you need to quote for fire stopping, and do you need to visit?
Send photos of each location, the wall or floor type, what passes through it and the rough size of each gap, plus any survey or fire risk assessment. Smaller jobs can usually be priced from that. Where a survey is needed to find and record the breaches, it is a paid service with its own report.
Can you build a fire-rated enclosure around electric meters?
Yes. Meter cupboards in shared areas often need a fire-rated enclosure built from tested boards, with a fire-rated access door or hatch, and sealed around the cables and pipes passing through. We build it so meters can still be read. Send photos and sizes of the meter area and we price it.
How quickly can fire stopping be quoted and completed?
Send the survey report or a list of locations with photos, and we price the work, usually within a few working days. A single small reinstatement can often be done soon after booking, subject to access. Larger packages are planned from the survey, and we agree dates when you book, including any section 20 timetable.
Can you fit a fire break wall in a loft?
Yes. In a loft shared with a neighbour, or above a building converted into flats, a fire-resisting wall may be needed between properties or flats. It is built from tested materials and sealed up to the roof and around any services. Send photos and rough measurements and we give you the price and time on site.
Can you price fire stopping across several buildings or as part of a refurbishment?
Yes. We price fire stopping across several buildings and within refurbishment projects, from drawings, surveys or a schedule of locations. Work can be phased to suit the programme, with records kept for each building. Send the documents and programme and we price it.
How quickly can you start, and what is the lead time from order to fitting?
It depends on the job. Inspections and assessments are booked as soon as payment clears, at the first date that suits both of us. Repairs and installations need parts or doors ordered first, so we give the expected start with the quote and confirm it once the deposit clears. If you have a deadline, tell us at the start.

Get a free fire stopping quote in Oxford

Our local engineers cover Oxford and all OX1, OX2, OX3, OX4, OX5, OX20 postcodes. Send us photos, a report or drawings and we will come back with a written quote.

Request a free fire stopping quote

Free no-obligation quote for Oxford and surrounding areas

No spam. We'll only use these details to respond to your enquiry.

Want us to quote for remedials or any other works? Email your specifications or requirements to info@dcsecurity.co.uk — the inbox is monitored daily.

24-hour response
SSAIB-certificated for CCTV, intruder alarms and access control
Based in Luton, covering London